Safariland Competition ELS Holster and Rig Accessories - Midsouth Sponsored Shooter Kevin Angstadt: “I feel that the new Safariland ELS (equipment locking system) is the most versatile competition rig on the market today. Gone are the days of having to have a belt set up for each sport or having to completely disassemble an existing belt.”

“Once an ELS receiver is mounted to the belt, it can accept an AR mag pouch, single or double stack mag pouch and a shotshell carrier. The holster can also be attached using an ELS receiver. An accessory on the belt can be change by merely pushing two tabs together and pulling up. A new accessory can be slid into the receiver and pushed until it locks into place therefore a mag pouch can be replaced with a shotshell carrier in seconds.”

- Kevin Angstadt, Midsouth Sponsored Triple Action Shooter

Kevin Angstadt - Kevin Angstadt, is quite an accomplished Action Pistol shooter! Kevin has placed in the Top 5 at the NRA Bianchi Cup three times and within the Top 25 nine times. In May 2010, he became the first Action Pistol shooter to become "Distinguished" in Production, making him the first Action Pistol shooter to be Triple Distinguished! With over 52 Regional and State Championship wins under his belt. We are proud to have Kevin wear the Midsouth logo!

Model 014 Open Class Competition Holster
- Body Machined out of aluminum to stabilize the handgun, yet offers little resistance for a secure and fast draw
- Ball joint on holster allows complete freedom of movement to customize the handgun draw
- Front nosepiece designed to retain handgun and help prevent gun from being knocked out of the holster once seated
- Fully adjustable nosepiece accommodates barrels from 5” to 7.5” (13 cm â€" 19 cm)
- Fit a variety of competition handguns, with or without red dot or magnified optics
- Injection-molded adjustable trigger guard lock
- Incorporates a simple push lock which secures handgun into the trigger block
- Available in Black. See The Selection

Safariland ELS Competition Belt (Model 032) and Underbelt

ELS Competition Belt (Model 032) -
- Reinforced to hold heavy competition handguns and ammunition
- Hook lined to loop to 030 underbelt
- Pre-cut holes to mount ELS 35 Receiver Plates in multiple locations and angles
- 1.75" (45mm) Belt Width
- Black See The Selection


Underbelt for ELS Competition Belt (Model 032) -
- Belt is worn in regular pant belt loops with the exterior exposed to mate with outer belt
- Available in Black with web finish See The Selection

Magazine Pouches for ELS Competition Belt


Open Front Magazine Pouch (Model 771) -
Two magazine tensioning screws on the back side to adjust tension on both the middle & the end of the magazine. The magazine sits against plastic rollers that reduce drag during draw. Open front design keeps index finger from touching the holder during reload. This pouch includes an ELS 34 locking fork and ELS 35 receiver plate. See Chart Below for Fit.

Open Top Magazine Pouch (Model 773) -
Uses the 90 degree adjustable belt loop. Two sets of magazine tension screws threaded through rollers for greater adjustment and fast reloads. Closed low cut front to help secure magazine and prevent it from being knocked out of the front pouch. Built up channel for clearance of the bullet during the draw. This pouch includes an ELS 34 locking fork and ELS 35 receiver plate.

ELS Equipment Locking System

Model ELS 34 - Mounts directly to the back of Tactical Accessory models and locks into the ELS 35 Receiver Plate. Allows for the quick detachment and attachment of various accessories to wherever an ELS 35 Receiver Plate is located, whether it be a Belt Clip, Tactical Rig, or elsewhere. Each ELS 34 includes (2) Locking Forks and hardware for both.

Model ELS 35 - The mounting platform for the ELS 34 Locking Fork. It can be placed in various locations, including Belt Clips, Tactical Rigs, or directly on MOLLE loops with the use of an MLS 16 Locking Fork. Allows for the quick detachment and attachment of various tactical accessories to wherever they are needed. Each ELS 35 includes (2) Receiver Plates and hardware for both. See The ELS Selection

Shotgun Shell Holders
- For use with 2 ¾ shells
- All shells can be grasped and employed at once
- Tensioners provide solid retaining system to hold shells,
even when some are removed
See The Selection

Custom Fit Paddle & Belt Loop Combo Holster

SafariLand Model 568 Custom Fit Holster - One of the lightest, thinnest, best fitting concealment holsters available. True to its name, it adjusts to a wide variety of popular handguns, giving each a custom fit in this holster. In just four fits, this design can accommodate over 100 handguns. See drop down menu to fit most popular autos and revolvers.